30 machinist iii jobs found

Job Title:             Machinist III/ IV  FLSA Status:       Non-Exempt Group:                  Regular – Full Time Department:        Manufacturing Location:             Houston, TX About Cooper Machinery Services: Cooper Machinery Services provides natural gas compression equipment and services to customers globally in the Oil & Gas, Power, Transportation, and Marine sectors. With a proud heritage dating back to 1833, Cooper Machinery Services is the OEM for legendary product lines including Cooper-Bessemer™, Ajax™, Superior™, Gemini, TSI, CSI, Enterprise, and Joy. Headquartered in Houston, TX, but with commercial and services hubs around the world, Cooper Machinery Services provides world-class services to more than 22,000 units in its installed base. Our strength is our people. Each employee plays an integral role in our success and growth. With a commitment to our vision that strong relationships drive strong results and better business, our people...

CNC MACHINIST III Department: Manufacturing Reports To: Project Manager/Scheduling Manager Pay Grade: Hourly Supervises: N/A FLSA Classification: Non-Exempt Approved By: Human Resources Administrator Revision Date: 09/28/2023   JOB SUMMARY CNC Machinist III is responsible for operating and programming a 5-axis CNC machine tool. This includes setting up and verifying tooling, setting part offsets, and programming computer-aided manufacturing (CAM) software. With little guidance, this person can complete a complex part from start to finish.  ESSENTIAL DUTIES AND RESPONSIBILITIES Performs safe operations by adhering to safety procedures and regulations. Observes machine operation to detect malfunctions or out-of-tolerance machining conditions.  Operates and maintains machine according to work instructions. Programs toolpaths with CAM software. Operates and programs 5-axis CNC machine tool. Takes precise measurements to verify program...

Overview Due to continued growth, we are seeking an experienced Manual/Conventional Machinists to work in our Irving, Texas facility, on large industrial electric motors and wind generators. Responsibilities Operate conventional, manual lathes (vertical and horizontal), mills and balance machines ( no CNC) Select proper tools and speeds for the machining process Perform set up and check runout on rotors, armatures, housings and parts as needed Machine and fabricate parts using engine lathes, mills, and drill presses; occasionally may operate grinder Measure and record machined part fits to .0002" with precision on ID and OD using micrometer or caliper Machine threads, turn and undercut commutators, bore and bush endbells Removal or installation of specific parts for machining or balancing Draw accurate prints for parts needing to be fabricated Properly order materials Qualifications Certificate or diploma from a trade school a plus Extensive...

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a...

Job Description We are proud to announce the establishment of a state-of-the-art Li-ion battery factory set amidst the beautiful Kansas City Metro. This groundbreaking green-field factory will serve as a pioneering hub for innovation in sustainable energy solutions. If you are passionate about contributing to a sustainable future and being part of a dynamic team shaping the electric vehicle revolution, this opportunity is tailor-made for you. We are seeking dedicated individuals to join us as full-time, on-site team members at our new, state-of-the-art factory located in the thriving city of DeSoto, Kansas. The Machinist III performs functions associated with all manufacturing operations, including working with engineers in set-up and calibration tasks, as well as performing rework and quality testing related to the productions of parts, components sub-assemblies, and final assemblies. The individual uses sophisticated programs to collect and evaluate operating data to...

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a...

Aerodyne Industries Job Description: Aerodyne Industries is a dynamic, rapidly growing engineering and information technology services firm headquartered on Florida’s exciting Space Coast. With locations throughout the US, we take pride in delivering small business agility with large corporation capabilities. Our list of clients count on us to prepare NASA’s Missions to the Moon and Mars and to defend our nation supporting the Missile Defense Agency and Department of Defense. Join the adventure of a lifetime by becoming a teammate with Aerodyne Industries and work on projects that will define our future. The Amentum ATOM Group at NASA Ames Research Center is seeking a skilled machinist to join our team in the Thermal Protection Materials Branch. The successful candidate will be responsible for machining and engineering technician tasks to help support a significant capability in the Entry Systems and Technology Division. These groups are responsible for developing and...

Machinist - Sr. Technical Supprt Staff II US-NJ-Princeton Job ID: 2025-20635 Type: Full-Time # of Openings: 1 Category: Research and Laboratory Overview The School of Engineering and Applied Science operates a Machine Shop to support the research needs of the faculty, staff, researchers, and students of the school. The Machinist will produce complex research prototype machined parts and components by programming, setting up, and operating computerized numerical control (CNC) Vertical Mills, Lathes, and traditional conventional metal and woodworking machines. The individual must be able to work with faculty, professional research staff, graduate students, and undergraduate students to ascertain and help define their specific needs and then propose ways to fabricate parts and components to satisfy those needs in a timely and economical manner. The Machinist must maintain high quality and safety standards, keep accurate records, and maintain the supplies and equipment...

Additional $6.00/hr. Safety Incentive Pay Receive 17% Weekday Nights, 26% Weekend Nights and 15% Weekend Day shift differentials Minimum Offer $ 20.82/hr. Maximum Offer $ 25.85/hr. Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. Department: MDC - Pharmacy FTE: 0.05 Casual Pool (as needed) Shift: Rotating Position Summary: Perform the duties of Technician Pharmacy I, II, and III as required. Perform a variety of pharmacy technician duties under the supervision of a licensed pharmacist. Inpatient to include tasks such as assist with pharmacy technician I and II training, audits, project assignments, and other related duties. Outpatient to include tasks such as answering the pharmacy phone line, learning and becoming efficient with the pharmacy management system by entering patient...

Job Overview The Maintenance Technician III ensures maximum operating efficiency, maintenance and repair of machines and equipment in production and facility. Job Responsibilities • Respond to production requests for immediate attention to production line issues and problems. • Maintain production equipment. • Maintain records of preventative maintenance. • Create requisitions of parts and supplies to maintain equipment. • Advance knowledge to maintain electrical/electronic systems and general production line equipment. • Identify problem areas and address with permanent solutions • All GLC employees are expected to perform any assignment or job task according to the stated safety policies & procedures. • All GLC employees are expected to produce our products in a manner that exceeds the quality and value expectation of our customers and consumers by adhering to Good Manufacturing Practices, Policies and Procedures outlined in our Safe Quality Food Program....

Midnight Sun Technologies, LLC Husbandry Technician III Closing Date: Until Filled Department: Midnight Sun Technologies - NIEHS Location: Durham, NC, USA Employment Type: Full Time Title : Husbandry Technician III Location : Durham, NC Status: Full-Time Position Summary: Midnight Sun is seeking a Husbandry Technician in Durham, North Carolina, in support of a contract providing mission-critical services to the National Institute of Environmental Health Sciences. The Animal Husbandry Support Contract for the National Institute of Environmental Health Sciences provides care, maintenance, and technical services for laboratory animals, seven (7) days per week, including weekends and holidays, for 72,447 square feet of laboratory animal facility space, which includes outside ancillary support areas, including a separate facility located approximately one mile from the main facility. Midnight Sun supports the care and maintenance of the animals, the...

Gexpro Services CAREER OPPORTUNITY  Job Title:                 Fabricator II Reports To:             Fabricator III Location:                 Theodore, AL   ABOUT FRONTIER TECHNOLOGIES: With two locations in Brewton, AL and Theodore, AL, Frontier Technologies specialize in Energy, Services, Engineering, and Logistics providing quality components and services to our customers that encompass fabrications, assemblies, subtractive manufacturing and the rework, repair, or refurbishment of a wide range of A-C Components items including in-house testing and engineering evaluations. Frontier Technologies is now part of Gexpro Services, a world-class Supply Chain Services outsource provider, specializing in developing and managing production inventory management programs.    Benefits  Competitive compensation Company Paid Life and AD&D Insurance Short Term and Long-Term Disability Various Medical, dental, vision plans to best suit your needs Flexible Spending...

Req ID: 400 Job Title: P-3 Aviation Ordnance man (AO) O-Level Maintenance Instructor - SQ Location: Jacksonville, FL, US 32221 Job Type: Full-Time Education: High School Diploma / GED Travel: Up to 50% Security Clearance Required: Ability to obtain and maintain a U.S. Security Clearance Job Requirements: Knowledge, Skills, and Abilities Must be able to work as part of a team consisting of IDs, SMEs, GSs, and Programmers to develop computer-based courseware. Must be able to utilize consistent exercise of discretion while working independently to proactively develop training materials and provide ground-based and in-flight training. Must have good verbal and written communication skills. Must be able to interact with military or government personnel. Must possess cultural awareness to provide comprehensive instructions to members of foreign militaries. Must have strong interpersonal skills to accept assignments and communicate technical...

Req ID: 399 Job Title: P-3 Aviation Electrician’s Mate (AE) O-Level Maintenance Instructor - SQ Location: Jacksonville, FL, US 32221 Job Type: Full-Time Education: High School Diploma / GED Travel: Up to 50% Security Clearance Required: Ability to obtain and maintain a U.S. Security Clearance Job Requirements: Knowledge, Skills, and Abilities Must be able to work as part of a team consisting of IDs, SMEs, GSs, and Programmers to develop computer-based courseware. Must be able to utilize consistent exercise of discretion while working independently to proactively develop training materials and provide ground-based and in-flight training. Must have good verbal and written communication skills. Must be able to interact with military or government personnel. Must possess cultural awareness to provide comprehensive instructions to members of foreign militaries. Must have strong interpersonal skills to accept assignments and communicate technical...

Req ID: 397 Job Title: P-3 IN-FLIGHT TECH - SQ Location: Jacksonville, FL, US 32221 Job Type: Full-Time Education: High School Diploma / GED Travel: Up to 50% Security Clearance Required: Ability to obtain and maintain a U.S. Security Clearance Job Requirements: Knowledge, Skills, and Abilities Must be able to work as part of a team consisting of IDs, SMEs, GSs, and Programmers to develop computer-based courseware. Must be able to utilize consistent exercise of discretion while working independently to proactively develop training materials and provide ground-based and in-flight training. Must have good verbal and written communication skills. Must be able to interact with military or government personnel. Must possess cultural awareness to provide comprehensive instructions to members of foreign militaries. Must have strong interpersonal skills to accept assignments and communicate technical concepts in...

Req ID: 395 Job Title: P-3 Acoustic Air Warfare Operator (AAW) Instructor – SQ Location: Jacksonville, FL, US 32221 Job Type: Full-Time Education: High School Diploma / GED Travel: Up to 50% Security Clearance Required: Ability to obtain and maintain a U.S. Security Clearance Job Requirements: Knowledge, Skills, and Abilities • Must be able to work as part of a team consisting of IDs, SMEs, GSs, and Programmers to develop computer-based courseware. • Must be able to utilize consistent exercise of discretion while working independently to proactively develop training materials and provide ground-based and in-flight training. • Must have good verbal and written communication skills. • Must be able to interact with military or government personnel. • Must possess cultural awareness to provide comprehensive instructions to members of foreign militaries. • Must have strong interpersonal skills to accept assignments and communicate...

Southwest Power Pool (SPP) is about more than power. We’re about the power of relationships. Our employees have the opportunity to work together to ensure electricity is delivered reliably and affordably to the millions of people living in our service territory. We have been voted one of Arkansas’ Best Places to work by Arkansas Business and we are looking for a member of our team who is passionate about our mission to keep the lights on! We have a core ideology here at SPP that we stand by: Do the right thing, for the right reason, in the right way. We believe in supporting our employees through a fantastic benefits package: Competitive and transparent pay with bonus opportunities Excellent insurance package including three great medical plans to choose from, employer-paid short-term disability, long-term disability, and life insurance Relocation bonus (if applicable) Hybrid working environment for positions that are eligible...

Semiconductor Engineering Technician III US-OR-Hillsboro Job ID: 32388 Type: Full-Time # of Openings: 1 Category: Engineering Additional Locations|CUS About the Role Are you seeking an opportunity to work with  photolithography semiconductor manufacturing equipment ? As an Engineering Technician III, you will provide customer support for onsite installations, repairs and maintenance of photolithography semiconductor equipment primarily in Hillsboro Oregon.   This is an exciting opportunity to be on the cutting edge of technology, and join a dedicated team enabling new technology to improve processes in a pre-production environment.   You will receive training in Austin, Texas or Hillsboro, Oregon for a period of 1-3 months.   NOTE:  Position will work a compressed work week requiring flexibility to change work schedule as required.   This position requires full-time presence at your assigned office(s)/worksite(s)/territory....

Description: JOB TITLE: Flex Technician WAGE SCALE: (Including $0.75 shift differential) Individuals accepted into the Flex Tech program can earn up to $3.00 on top of their base hourly rate. Increase is based on department skills in above departments and willingness to become competent in each department. · Flex Technician: $19.75 start · Flex Technician I: $20.75 knowledge of 1 support department · Flex Technician II: 21.75 knowledge of 2 support departments · Flex Tech III: $22.75 knowledge of 3 support departments. HOURS: 3:00pm – 11:00pm Monday - Friday. Voluntary overtime once trained. LOCATION: Interprint, Inc. 101 Central Berkshire Blvd. Pittsfield, MA We are close to Lee, MA; Westfield, MA; Troy, NY and Albany, NY BENEFIT HIGHTLIGHTS: Medical, Dental, Life and Disability Insurance, Paid Time Off, Paid Holidays, 401(k) with company match, Flex Spending Account, Career path with Compensation Tier Program provided, ask for details....

PROCESS ENGINEER III Department: Engineering Reports To: Lead Engineer Pay Grade: Salary Supervises: N/A FLSA Classification: Exempt Approved By: Human Resources Administrator Revision Date: 01/09/2025 JOB SUMMARY Process Engineer III is responsible for programming toolpaths with CAM software and creating fixtures and process drawings. ESSENTIAL DUTIES AND RESPONSIBILITIES Performs safe operations by adhering to safety procedures and regulations. Participates in performance improvement activities with the manufacturing teams as needed. Provides technical support for manufacturing, material, and subcontracting in the post-PO phase. Completes estimates using an enterprise resource planning (ERP) system, which includes detailed routing and a detailed bill of materials. Sends RFQs to vendors for material and/or subcontracting operations to complete quotes. Conducts engineering reviews for the contract review process, which...