13 selector jobs found

Medical Claims Representative US-MI-Lansing Job ID: 2026-8713 # of Openings: 1 Category: Claims Farm Bureau Center Overview Medical Claims Representative Objective To provide efficient investigation, evaluation and negotiation of Michigan No-Fault claims. Responsibilities Medical Claims Representative Responsibilities Respond to and control the disposition of all assigned Michigan No-Fault claims.   Work with computer systems keying functions, including but not limited to letter composition, log entry, diary entry, report of investigation composition, and draft production.   Read and apply policy of Michigan No-Fault acts as written. Qualifications Medical Claims Representative Qualifications Required Minimum two to three years medical claims handling experience required.   Must possess a valid driver license with an acceptable driving record.    Preferred High school diploma or equivalent required. Bachelor’s degree in...

Large Loss Property Claims Manager US-MI-Lansing Job ID: 2026-8704 # of Openings: 1 Category: Claims Personal Residence (Lansing Area) Overview Large Loss Property Claims Manager Objective To manage all functions of the Property Specialists unit necessary to provide superior customer service by the prompt and efficient handling, control, and proper disposition of large and/or complex claims. To monitor the corporation's property policies and procedures under the direction of the Director of Property & Liability Claims. To aid in the assessment and adoption of Best Practices and Industry Benchmarks to continually improve customer service. To act as a liaison with other divisions. Responsibilities Large Loss Property Claims Manager Responsibilities Coordinate, manage, and supervise the handling of large and/or complex property/casualty claims to have a significant effect on the overall profit picture of the company. Provide quality service to the...

Triumph Group Job Summary The Mill Machinist at Triumph Geared Solutions - Macomb is responsible for the operation and basic maintenance of Mill machines in the Mill Department. The Mill Machinist must be able to produce high-quality products according to Triumph Gear Systems Mill Department operations manual. Duties/Responsibilities Clock in & out of appropriate job operations Read and interpret blueprints Adhere to job plans per job travelers Set-up multiple types of jobs Operate all mills and associated machines as assigned Basic Maintenance of mills First part quality inspections Use precision measurement equipment Consistently produce quality parts Adhere to directions and instructions of direct supervisor Other duties as assigned. Qualifications High school diploma or equivalent required. 5 years’ experience with set-up and operation of CNC Mill Knowledgeable of set-up requirements and operation of a horizontal and vertical...

Hydraulic Technician Paragon Technologies, a SunSource company, specializes in providing world-class service, repair and re-manufacturing in the areas of electronics, hydraulics, robotics, servos and mechanical components for various industries. https://www.paragontech.com/ Position Summary: Performs service and repair for hydraulic components. Responsibilities Evaluate, build and test cylinders, pumps and motors. Evaluate warranty hydraulic cylinders, pumps and motors. Attend advanced training within hydraulic field. Reverse engineer hydraulic components. Create and document testing procedures. Train new and/or junior level hydraulic technicians. Provide hydraulic field service to off-site customers on an as needed basis. Design test fixtures and test set ups. Conduct intercompany training sessions. Coordinate workflow for machine shop with Production Manager. Coordinate with Production Manager on problem jobs, afterhours ESFs, and capital...

Triumph Group Job Summary The Gear Grind Machinist at Triumph Geared Solutions - Macomb is responsible for the operation and basic maintenance of Gear Grind machines in the Gear Grind Department. The Gear Grind Machinist must be able to produce high-quality products according to Triumph Gear Systems Gear Grind Department operations manual. Duties/Responsibilities Clock in & out of appropriate job operations Read, interpret, and apply information from engineering drawings Adhere to job plans per job travelers Set-up multiple types of jobs Operate CNC Gear Grind Equipment (Using CBN form wheels & dressable grit wheels) Basic Maintenance of CNC gear grind machines (KAPP, Hofler, Klingelnberg) First part quality inspections Use precision measurement equipment (Use of micrometers, MBW & MOW checks) Consistently produce quality parts. (Understanding of gear terminology. LEAD, SPACING, PROFILE Etc.) Adhere to directions and instructions of direct...

Dynamis Dynamis is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. If you’d like to view a copy of Dynamis’ affirmative action plan, please e-mail Recruiting@dynamis.com . If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact Recruiting@dynamis.com . This e-mail address is reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation in the job application process. Please do not call about the status of your job application if you do not require accessibility assistance or an accommodation. Messages sent for other purposes, such as following up on an...

Triumph Group Job Summary The Metallurgical Lab Technician supports daily metallurgical laboratory operations for aerospace manufacturing, heat treat verification, and customer-required laboratory testing. This position is responsible for preparing test specimens, controlling test-piece flow, performing defined laboratory checks, maintaining records, and supporting metallurgical evaluations in accordance with internal procedures, customer requirements, applicable ASTM/AMS standards, and Nadcap Materials Testing Laboratory expectations. Duties/Responsibilities Perform daily check-in of product received from Heat Treat, including review of work order books, verification of part counts, confirmation of test-piece or sectioned-piece quantities, and update of applicable operations. Manage test pieces, coupons, carbon bars, v-notches, and other laboratory samples, including procurement, tracking, stamping, routing, staging, retrieval, and control of samples needed...

Triumph Group Job Summary The Manual Grind Machinist at Triumph Geared Solutions - Macomb is responsible for the operation and basic maintenance of Manual grind machines in the Grind Department.  The Manual Grind Machinist must be able to produce high-quality products according to Triumph Gear Systems Grind department operations manual. Duties/Responsibilities Clock in & out of appropriate job operations Read, interpret, and produce machined dimensions from information on engineering drawings Adhere to job plans per job travelers Set up multiple types of jobs with fixtures Operate Manual ID / OD / Surface grind, Lap, and associated machines Basic Maintenance of Manual Grinders Use precision measurement equipment to ensure first piece and production quality Install and maintain grinding wheels Adhere to directions and instructions of team leader Other duties as assigned. Qualifications High school diploma or equivalent required....

Triumph Group Job Summary The ID/OD Machinist at Triumph Geared Solutions - Macomb is responsible for the operation and basic maintenance of CNC ID/OD grinders in the ID/OD Grind Department.  The ID/OD Machinist must be able to produce high-quality products according to Triumph Geared Solutions ID/OD Grind department work instruction. Duties/Responsibilities Clock in & out of appropriate job operations Read, interpret, and produce machined dimensions from information on engineering drawings Adhere to job plans per job travelers Set up and operate CNC and Manual OD and ID grind equipment with minimal supervision Grinding of splined shafts and aircraft gears holding tolerances within .0001” Basic Maintenance of CNC Grinders Use precision measurement equipment to ensure first piece and production quality Maintain proper documentation of SPC data Consistently produce quality parts Familiarity with lean manufacturing and continuous improvement...

Triumph Group Job Summary The Mill Machinist at Triumph Geared Solutions - Macomb is responsible for the operation and basic maintenance of Mill machines in the Mill Department. The Mill Machinist must be able to produce high-quality products according to Triumph Gear Systems Mill Department operations manual. Duties/Responsibilities Clock in & out of appropriate job operations Read and interpret blueprints Adhere to job plans per job travelers Set-up multiple types of jobs Operate all mills and associated machines as assigned Basic Maintenance of mills First part quality inspections Use precision measurement equipment Consistently produce quality parts Adhere to directions and instructions of direct supervisor Other duties as assigned. Qualifications High school diploma or equivalent required. 5 years’ experience with set-up and operation of CNC Mill Knowledgeable of set-up requirements and operation of a horizontal and vertical...

Triumph Group Job Summary We are seeking a Process and Tooling Engineer for our Macomb, MI facility. This position is a onsite role, responsible for developing and maintaining manufacturing process sketches, designing and ordering tooling, and troubleshooting shop-floor technical issues. Duties/Responsibilities Develop manufacturing processes from customer blueprints, from raw material through finished product or assembly. Incorporate customer and internal change requests to improve processes or address amended requirements. Review and interpret customer specifications, POs, and supplementary documents for incorporation into current and new processes. Design and order tooling, including holding fixtures, quench plugs and dies, spline and functional gages, gear cutters, and gear grind wheels. Read schematics/prints, follow procedures, and apply computer skills and technical knowledge to troubleshoot and resolve technical problems, including timing,...

Description: Employment Type: Full-Time, Hybrid #LI-HYBRID Entry Salary Range: $25.94-$31.13 per hour with an annual award opportunity based on individual and credit union performance. Comprehensive Benefits Package We're committed to supporting your well-being and work-life balance through a robust benefits offering: Health & Wellness Medical, dental, and vision insurance to keep you and your family healthy. Financial Peace of Mind 401(k) with company match, life insurance, and disability coverage. Time Off Generous paid time off (PTO), paid holidays, and paid parental leave. Professional Growth Learning and development programs, plus tuition reimbursement to support your career journey. Additional Perks Free Telemedicine Employee Assistance Program (EAP) Wellness initiatives Paid Community Action Volunteer Hours *Parental Leave and Tuition Reimbursement are available after one year of service What you should know about...

Triumph Group Job Summary The Customer Account Manager at Triumph Geared Solutions – Macomb serves as the primary link between the customer and the Product Line Director to ensure communication of status and potential problem areas while advising on how to mitigate those concerns. Duties/Responsibilities Act as the primary point of contact for aerospace customers (OEMs, airlines, MROs, defense agencies).  Build strong, long‑term customer relationships and maintain high satisfaction levels.  Lead customer meetings, business reviews, and communication on program status. Prepare and submit quotations, pricing updates, and proposals.  Manage negotiation of long‑term agreements (LTAs) and service-level agreements (As).  Address quality issues, non‑conformances, warranty claims, and technical concerns.  Provide timely updates and closure of customer issues. Collect customer demand forecasts and translate them into internal planning forecasts  Identify risks,...