MetalTek International

Description: MetalTek International is an industry leader providing metal component solutions to customers from around the world with products that reach the depths of the oceans to the depths of space. MetalTek employs nearly 800 people in four locations worldwide. Our employees are Making A Lasting Difference and enjoy an environment where their efforts are rewarded, continuous improvement is valued, and career growth is encouraged.  The Wisconsin Centrifugal Division of MetalTek International has been a proud member of the Waukesha community for over 75 years. We are conveniently located 2 miles Southeast of I-94 and HWY F and offer a comprehensive benefits package. Consider a career at one of the largest centrifugal foundries in the world!   We are now hiring a Machine Shop Supervisor.  Some key responsibilities include: Maintain employee safety, staffing, training, coaching, and performance management.  Identify and implement continuous improvement activities to...

Description:   Inspector, Liquid Penetrant - 1st Shift Pevely, MO Description Ensure product conforms to quality requirements as set forth by customer. This includes any and/or all of the following: dimensional checks, targeting, use of gauges or fixtures, visual inspections, liquid penetrant testing, pressure testing, magna-flux testing, and any other learned techniques or processes. Inspect and process castings to customer specifications using: LP techniques, Pressure Testing, Magna-flux procedures, Visual inspection, dimensional analysis, straightening, targeting, gauging and fixturing techniques. Assist supervisors as needed to expedite castings through manufacturing work areas. Review quality specifications, coordinate the flow of paperwork (lot tags, travelers) and utilize shop-floor reporting to record casting progression and job close-out. Work closely with Finishing Area associates to communicate quality requirements on castings. Assist supervisors as needed to...

Description: MetalTek International is an industry leader providing metal component solutions to customers from around the world with products that reach the depths of the oceans to the depths of space. MetalTek employs nearly 800 people in five locations worldwide. Our employees are Making A Lasting Difference and enjoy an environment where their efforts are rewarded, continuous improvement is valued, and career growth is encouraged.  The Wisconsin Centrifugal Division of MetalTek International has been a proud member of the Waukesha community for over 75 years. We are conveniently located 2 miles Southeast of I-94 and HWY F and offer a comprehensive benefits package. Consider a career at one of the largest centrifugal foundries in the world!   We are now hiring for General Foundry opportunities. Job Responsibilities include: Perform charge preparation and melt operations. Set up and operate centrifugal casting machines to make a variety of castings to very close...

Description: We have an opening for a new Business Development Specialist role that will focus exclusively on growing our centrifugal casting business within the Process Industry Market for both Wisconsin Centrifugal and Sandusky International. The Process Industry Business Development Specialist – Centrifugal, is an office-based role responsible for achieving WC & SI forecasted bookings and new business goals using primarily virtual selling tools.     Key Responsibilities Include:  Develop and execute a prospecting and lead follow up plan.  Leverage network to prospect and uncover new opportunities with new and existing customers.  Develop sales strategies and plans aligned with plant strategies.  Follow up on proposals and close orders.  Achieve plant-specific and total bookings and new business goals.  Follow up on new RFQs to understand customer needs  Own the account sales process to drive profitable sales growth by incorporating Sales Insights training,...

Description: MetalTek International is an industry leader providing metal component solutions to customers from around the world with products that reach the depths of the oceans to the depths of space. MetalTek employs nearly 800 people in five locations worldwide. Our employees are Making A Lasting Difference and enjoy an environment where their efforts are rewarded, continuous improvement is valued, and career growth is encouraged.  The Wisconsin Centrifugal Division of MetalTek International has been a proud member of the Waukesha community for over 75 years. We are conveniently located 2 miles Southeast of I-94 and HWY F and offer a comprehensive benefits package. Consider a career at one of the largest centrifugal foundries in the world!   We are now hiring for General Foundry opportunities. Job Responsibilities include: Perform charge preparation and melt operations. Set up and operate centrifugal casting machines to make a variety of castings to very close...

Description: We have an opening for a new Business Development Specialist role that will focus exclusively on growing our static casting business within the Process Industry Market for both Wisconsin Investcast and Carondelet Foundry. The Process Industry Business Development Specialist – Static Castings, is an office-based role responsible for achieving WI & CF forecasted bookings and new business goals using primarily virtual selling tools.     Key Responsibilities: Develop and execute a prospecting and lead follow up plan.  Leverage network to prospect and uncover new opportunities with new and existing customers.  Develop sales strategies and plans aligned with plant strategies.  Follow up on proposals and close orders.  Achieve plant-specific and total bookings and new business goals.  Follow up on new RFQs to understand customer needs  Own the account sales process to drive profitable sales growth by incorporating Sales Insights training, pre-call planning...

Description: Set up, adjust and operate cutoff saw, tube straightening and shot blast equipment. Perform a variety of operations of a roughing nature. Speeds, feeds and operational sequences usually established but operator may adjust or modify within standard practice. Perform basic maintenance on equipment as needed. Ensure heat number traceability. Initiate process change requests and maintain accurate records of operations. Work from written or verbal instruction, drawings, process sheets, route cards and knowledge of production operations to anticipate department needs and operate power forklift truck to transport materials, parts, fixtures, equipment and castings as needed to facilitate production. Maintain log and service record on forklift equipment and report malfunctions to supervisor. Perform level I liquid penetrant inspection including application of visible and/or fluorescent inspection to identify defects. Perform cosmetic and investigative grinding as needed...

Description: Inspect, repair and replace furnace and AOD vessel linings. Install refractory and tuyeres. Mortar, lay and cut bricks according to drawings, ram roof and furnace refractory and replace arc/AOD shell brick as required. Remove damaged or worn parts and linings using chisels, hammers, bars, etc. Perform routine maintenance on arc furnaces. Operate power lift truck as needed to transport materials. Maintain inventory of parts, lining materials, etc. Assist with induction furnace repairs as needed. Requirements: Good mechanical aptitude. Basic blueprint knowledge. Experience with basic measuring instruments. Able to lift and carry 75 lbs. Good general knowledge of induction furnaces. Familiarity with a variety of refractory materials. Equal Opportunity Employer, including Veterans and Individuals with Disabilities Drug Free Workplace Equal employment opportunity, including veterans and individuals with disabilities. PI286171382

Description:    · Perform duties to supply dies and die components, in good operational condition, to foundry in accordance with production needs. · Prepare die “kits” consisting of dies, covers, bolts, etc. in accordance with job routing and die safety standards, based on scheduled foundry production needs. Remove dies and related components from storage maintaining proper records as to inventory and die movement. Maintain Die Services storage and holding areas in orderly condition. · Inspect dies and related equipment for dimensional and general condition. Record findings and recommend repairs. Assist in shot blasting and die repair duties. · Move and deliver dies and die kits to foundries using various forklift trucks and lifting equipment. · Inspect, clean and spray dies with protective coating upon return from foundry. Return dies to storage, updating inventory records. · Assist and instruct new employees. Requirements:    · Strong knowledge of WC foundry practices...

Description: Perform a variety of duties to assist ARC crew with melt and pour activities.  Set up and operate ingot casting machine.  Perform routine maintenance on arc furnace ladles.  Operate power lift truck as needed to transport materials. Requirements: Ability to lift and carry 75 lbs.  Basic math skills and tape measure utilization  Ability to operate overhead crane.  Ladle/funnel repair experience preferred.  Melting or casting experience helpful. Equal Opportunity Employer, including Veterans and Individuals with Disabilities Drug Free Workplace Equal employment opportunity, including veterans and individuals with disabilities. PI286171154

Description: Description Successfully complete formal and informal Radiation Safety and X-Ray Technician Level I and II Training. Assist certified radiographers in the performance of radiographic operations including selection of appropriate techniques, positioning of materials, exposure of film, etc. to identify and assess defects in castings and weldments. Perform darkroom procedures to develop film. Learn interpretation of film results to determine whether parts pass or fail inspection based on knowledge of defect seriousness, codes, standards and customer specifications.  Prepare necessary documentation of inspection process. Move parts by hand and using forklifts, hoists and other lifting equipment, to facilitate inspection. Learn radiation safety policies and procedures to ensure the safety of MetalTek personnel and the public. Obtain certification(s) and perform or assist in other NDT disciplines as needed. Requirements: Requirements High School diploma or...

Description: We have an opportunity available in a highly energized, collaborative environment for someone with strong technical knowledge to take on the role of Sales Engineer. This position involves planning, pricing, selling and customer service where heat, wear and corrosion resistant metal alloys are used. Our well-established onboarding program and excellent training plans allow you to learn the business, will lead to daily success, and provide a broad knowledgebase for future growth opportunities within the company.       Requirements: The person we seek should have a degree in engineering, materials technology, or business and/or experience in the metals manufacturing industry with 3-5 years sales experience in a foundry, machining or other metals manufacturing environment preferred. Knowledge of related markets, applications, product design and an excellent understanding of foundry and fabrication techniques is strongly preferred. Will consider training a recent college...

Plan and schedule work performed by the Maintenance Department to assist in keeping everyone safe and equipment running to provide quality castings, on time.  Job Responsibilities: Enter data for equipment, work order information, etc…. Generate work orders for preventative or predictive maintenance, continuous improvement, safety, and other types of tasks. Assist with assigning work orders of Maintenance personnel. Request quotes from vendors for specific parts. Generate reports, such as, work order completion, age of work orders in backlog, etc... Work on special projects, as assigned. Assisting with safety and environmental data entering and reporting for example. Perform other duties as required by Supervisor. Basic Math (Decimals and fractions); Basic Reading (Interpretation of drawings, understanding and use of written instructions); Basic Writing (Knowledge of electrical wiring, pipefitting, pneumatic & hydraulic systems, etc. to perform repairs)....

Description: Plan and schedule work performed by the Maintenance Department to assist in keeping everyone safe and equipment running to provide quality castings, on time.  Job Responsibilities: Enter data for equipment, work order information, etc…. Generate work orders for preventative or predictive maintenance, continuous improvement, safety, and other types of tasks. Assist with assigning work orders of Maintenance personnel. Request quotes from vendors for specific parts. Generate reports, such as, work order completion, age of work orders in backlog, etc... Work on special projects, as assigned. Assisting with safety and environmental data entering and reporting for example. Perform other duties as required by Supervisor. Requirements: Basic Math (Decimals and fractions); Basic Reading (Interpretation of drawings, understanding and use of written instructions); Basic Writing (Knowledge of electrical wiring, pipefitting, pneumatic & hydraulic systems, etc....

Ensure product conforms to quality requirements as set forth by customer. This includes any and/or all of the following: dimensional checks, targeting, use of gauges or fixtures, visual inspections, liquid penetrant testing, pressure testing, magna-flux testing, and any other learned techniques or processes. Inspect and process castings to customer specifications using: LP techniques, Pressure Testing, Magna-flux procedures, Visual inspection, dimensional analysis, straightening, targeting, gauging and fixturing techniques. Assist supervisors as needed to expedite castings through manufacturing work areas. Review quality specifications, coordinate the flow of paperwork (lot tags, travelers) and utilize shop-floor reporting to record casting progression and job close-out. Work closely with Finishing Area associates to communicate quality requirements on castings. Assist supervisors as needed to set up workstations and package finished castings to send to customers. Will be...

Description: Inspect furnaces, ladles and funnels for wear. Remove damaged or worn parts and linings using chisels, hammers, bars, etc. Repair or rebuild melt furnaces, linings, ladles and funnels. Maintain inventory of parts, lining materials, etc. Requirements: Good general knowledge of induction furnaces. Good mechanical aptitude. Able to repeatedly lift up to 50 lbs. Familiarity with a variety of refractory materials. Equal Opportunity Employer, including Veterans and Individuals with Disabilities Drug Free Workplace Equal employment opportunity, including veterans and individuals with disabilities. PI286006653

Description: Set up, adjust and operate pullbores to machine a variety of diameter parts and tubes to close tolerances. Recognize machining problems by sound, off-standard or unusual cutting conditions and adjust accordingly. Perform test cuts to ensure that the job is setup correctly. Working from blueprints, routings, process sheets, etc., maintain specified tolerances and insure concentricity, checking own work with precision measuring devices. Select, prepare and install respective tooling (including calculation of head size, grinding of heads) including bars, bushings, packing and spring assembly. Adjust speeds, feeds, tooling and operational sequences as needed to resolve machining problems and to meet production standards. Complete inspection and required documentation. Initiate process change and adjustment requests and maintain accurate records of operations including Statistical Process Control charting. Working with other work group members, assist in development of...

Our Pevely facility is seeking a motivated CNC Programmer with a hands-on approach to handle our immediate programming needs and to help our team outline and implement new forms of automation at our foundry. This individual will be a key contributor to our current production needs and will play an important role in leading our foundry into new technologies. Personal development through structured technical training and through interaction with in-house professionals of various backgrounds is a key element of this position. Job Responsibilities: Develop CNC programs using Delcam Powermill for the production of sand-cast components, including selection of optimum speeds, feeds, tooling, fixtures and machining techniques to ensure accurate dimensional surface finish requirements. Set-up, adjust, operate, and maintain a robotic cell for machining sand molds and foundry tooling from a variety of materials. Perform machining duties to prove out programs on new production and...