235 control systems hardware engineer jobs found

Job Description We have multiple openings for Control Systems Hardware Engineers . You will provide engineering solutions for developing, implementing, and maintaining control systems hardware in the National Ignition Facility (NIF), the world’s highest energy pulsed laser system. With over 60,000 control points distributed throughout the facility, many of NIF’s subsystems have control technologies at their core.  You will contribute to the engineering design and development of new hardware and for system upgrades to continually improve system performance and reliability. These positions are in the Laser Systems Engineering and Operations (LSEO) Division, within the Engineering Directorate.  These positions will be filled at either the SES.2 or SES.3 level depending on your qualifications. Additional job responsibilities (outlined below) will be assigned if you are selected at the higher level. In this role, you will As a member of the controls team, provide motion controls...

Job Description We have multiple openings for Control Systems Hardware Engineers . You will provide engineering solutions for developing, implementing, and maintaining control systems hardware in the National Ignition Facility (NIF), the world’s highest energy pulsed laser system. With over 60,000 control points distributed throughout the facility, many of NIF’s subsystems have control technologies at their core.  You will contribute to the engineering design and development of new hardware and for system upgrades to continually improve system performance and reliability. These positions are in the Laser Systems Engineering and Operations (LSEO) Division, within the Engineering Directorate.  These positions will be filled at either the SES.2 or SES.3 level depending on your qualifications. Additional job responsibilities (outlined below) will be assigned if you are selected at the higher level. In this role, you will As a member of the controls team, provide motion controls...

Job Description We have multiple openings for Control Systems Hardware Engineers . You will provide engineering solutions for developing, implementing, and maintaining control systems hardware in the National Ignition Facility (NIF), the world’s highest energy pulsed laser system. With over 60,000 control points distributed throughout the facility, many of NIF’s subsystems have control technologies at their core.  You will contribute to the engineering design and development of new hardware and for system upgrades to continually improve system performance and reliability. These positions are in the Laser Systems Engineering and Operations (LSEO) Division, within the Engineering Directorate.  These positions will be filled at either the SES.2 or SES.3 level depending on your qualifications. Additional job responsibilities (outlined below) will be assigned if you are selected at the higher level. In this role, you will As a member of the controls team, provide motion controls...

Job Description We have multiple openings for Control Systems Hardware Engineers . You will provide engineering solutions for developing, implementing, and maintaining control systems hardware in the National Ignition Facility (NIF), the world’s highest energy pulsed laser system. With over 60,000 control points distributed throughout the facility, many of NIF’s subsystems have control technologies at their core.  You will contribute to the engineering design and development of new hardware and for system upgrades to continually improve system performance and reliability. These positions are in the Laser Systems Engineering and Operations (LSEO) Division, within the Engineering Directorate.  These positions will be filled at either the SES.2 or SES.3 level depending on your qualifications. Additional job responsibilities (outlined below) will be assigned if you are selected at the higher level. In this role, you will As a member of the controls team, provide motion controls...

Job Description We have multiple openings for Control Systems Hardware Engineers . You will provide engineering solutions for developing, implementing, and maintaining control systems hardware in the National Ignition Facility (NIF), the world’s highest energy pulsed laser system. With over 60,000 control points distributed throughout the facility, many of NIF’s subsystems have control technologies at their core.  You will contribute to the engineering design and development of new hardware and for system upgrades to continually improve system performance and reliability. These positions are in the Laser Systems Engineering and Operations (LSEO) Division, within the Engineering Directorate.  These positions will be filled at either the SES.2 or SES.3 level depending on your qualifications. Additional job responsibilities (outlined below) will be assigned if you are selected at the higher level. In this role, you will As a member of the controls team, provide motion controls...

GovCIO is a team of transformers—people who are passionate about transforming government I.T. We believe in making a difference by developing digital strategies and delivering the technology-related innovation that improves governmental operations each day. But we can't do it alone. We welcome and nurture an inclusive and diversified work culture. Because different backgrounds, experiences, abilities, and perspectives make us better decision-makers, problem solvers, and creators. We're changing the face of I.T. - from our diverse staff to the end-products we develop. And we're excited to expand our team. Are you ready to be a transformer? Responsibilities Designs and implements information assurance and security engineering systems with requirements of business continuity, operations security, cryptography, forensics, regulatory compliance, internal counter-espionage (insider threat detection and mitigation), physical security analysis (including facilities analysis,...

Automation/Controls Engineer - cGMP Parenteral - Primarily accountable for the implementation, life-cycle, and ownership of the Parenteral PCS/MES and PLC process recipes related to the Fill/ Finish production.   Responsibilities include: Adherence to the global strategy & scope by maintaining/delivering/implementing the required process control within the DCS, PCS, MES and PLC systems for both new and legacy systems.   Alignment of the system with the Global Execution Systems approach within Manufacturing Operations.   Technical project ownership for all Execution Systems related project deliverables including oversight & review of contractors/integrators work during support projects Ownership of the process recipe and configuration across the Parenterals MES, PCS, and/or PLC systems for the Fill/ Finish Value Stream. Incident tracking, remediation and improvement associated with the Fill/ Finish Value Stream. Tests...

The Controls Engineer is responsible for developing and implementing optimal, cost-effective design, maintenance and troubleshooting processes and methods on plant facilities and production equipment in accordance with electrical codes, safety requirements, and good industrial practices. PRINCIPAL FUNCTIONAL RESPONSIBILITIES: Provide troubleshooting support when necessary to restore plant equipment to operation. Provide technical support & education to plant employees executing electrical or controls work. Design, develop and test electrical and control hardware, software, machinery and equipment to support plant production. Manage all aspects of assigned engineering projects including design, planning, budgets, procurement & contractor management. Create preventative maintenance systems to sustain performance of plant equipment. Support production, quality, safety and lean initiatives to improve OEE and overall facility performance Leads the plant’s...

Company is a leading industrial automation distributor, since 1985, located in Allen, TX and is seeking a detail oriented Electrical Automation Project Engineer. Job Duties Include: Assisting outside saled with projects for customers Handling direct calls from customers on particular project ideas Inter-office communications Creating Quotes using Excel Visit Customer locations to assist with projects Up to 25% travel Work with Customer to design projects using company products Required Experience BS in Electrical Engineering, Industrial Technology, Controls Engineering or similar. Hands-on experience with PLCs and motion control components and systems Proficiency programming PLCs and HMIs Understanding motion control concepts with experience in sizing and specifying stepper, servo and various motor and drive systems Experience with industrial automation Experience with and good understanding of electro-mechanical systems Experience reading...

National Radio Astronomy Observatory Position Description: Position Sum mary The Central Development Laboratory (CDL) at the National Radio Astronomy Observatory (NRAO) is currently hiring an experienced mid-level FPGA design engineer to work on its digital design team. CDLs digital design team works on cutting-edge projects that provide the critical technology and expertise enabling the next generation of radio astronomy instrumentation. The ideal candidate will be hi gh ly proficient in Verilog FPGA design methodol ogy , implementation, simulation, and verification of embedded processor-based FPGA SOC designs. This position offers an active role in the design of future instrumentation that will reveal the hidden universe such as gravitational waves, the origins or galaxies, the origins of star and planet formation, and black holes. The selectee will report to the Digital Design Team manager. CDLs digital design team works...

Triumph Group Location: West Hartford, Connecticut, United States, 06105 Function: Other Overview Triumph Systems, Electronics and Controls is a leading independent aerospace system supplier for the commercial and military helicopter and business jet markets. Based in West Hartford, CT, Triumph employs approximately 500 employees. The Company's key products and services include electronic engine controls, fuel metering units, main fuel pumps and environmental control systems for both the OE and aftermarket/spares end markets. Triumph Engine Control Systems' Electronics Engineering department is looking to fill a Power Electronics Design Engineer position in our West Hartford, CT location. Our Power Electronics Design Engineers develop unique solutions that perform actuator controls, motor controls, environmental controls, electro-mechanical sensor interfacing, fuel/fluid regulation, digital communication, and input power conditioning. Additionally, these individuals...

Infinera Location: San Jose, CA Full/Part Time: Full time Req ID: 2023172 Contractor Firmware Engineer-Intern/Co-op This position requires low level software development experience, embedded C/C++ coding skills, and good understanding of multi-threaded embedded system design. As a member of the Firmware team, you are responsible for FW design, implementation and testing for Infinera's next generation of Optical Engine used for Long Haul, Metro and Data Center Interconnects. Responsible for FW Requirement Documents, Design documents and help on testing documentation. Interface with optical, hardware, FPGA, software, manufacturing and test teams for assigned FW functions. Transfer of Information to manufacturing, debug and fix customer issues. Job Requirements: BS/MS in Electrical Engineering or Computer Science with development experience in multi-thread real time environment. Great C/C++ programming skills. Visual Basic, Matlab or Python are considered...

Triumph Group Location: West Hartford, Connecticut, United States, 06105 Function: Other Overview Triumph Systems, Electronics and Controls is a leading independent aerospace system supplier for the commercial and military helicopter and business jet markets. Based in West Hartford, CT, Triumph employs approximately 500 employees. The Company's key products and services include electronic engine controls, fuel metering units, main fuel pumps and environmental control systems for both the OE and aftermarket/spares end markets. Triumph Engine Control Systems' Electronics Engineering department is looking to fill a Power Electronics Design Engineer position in our West Hartford, CT location. Our Power Electronics Design Engineers develop unique solutions that perform actuator controls, motor controls, environmental controls, electro-mechanical sensor interfacing, fuel/fluid regulation, digital communication, and input power conditioning. Additionally, these individuals...

National Radio Astronomy Observatory Position Description: Position Sum mary The Central Development Laboratory (CDL) at the National Radio Astronomy Observatory (NRAO) is currently hiring an experienced mid-level FPGA design engineer to work on its digital design team. CDLs digital design team works on cutting-edge projects that provide the critical technology and expertise enabling the next generation of radio astronomy instrumentation. The ideal candidate will be hi gh ly proficient in Verilog FPGA design methodol ogy , implementation, simulation, and verification of embedded processor-based FPGA SOC designs. This position offers an active role in the design of future instrumentation that will reveal the hidden universe such as gravitational waves, the origins or galaxies, the origins of star and planet formation, and black holes. The selectee will report to the Digital Design Team manager. CDLs digital design team works...

Job Purpose: As a Sr. Semiconductor Test Engineering Manager of the Laser Solutions Group, you will support new product development, production test development and sustaining. Responsible for troubleshooting line issues to determine root cause and possible engineering solutions. Determine opportunities for improvements in existing test processes. Ensures smooth implementation of design changes and performs process validation. Will work closely with R&D engineers to assure the smooth transfer of new products to manufacturing (Test). Responsible for all aspects of high power laser diode performance verification. This person will work closely with engineering, product development and production groups to characterize the performance of high power laser semiconductor diode chips, arrays and higher level of test assemblies. . Duties: Develop and maintain production test processes and equipment for products produced. Support the production testing of...

Comcast’s Technology, Product & Experience organization works at the intersection of media and technology. Our innovative teams are continually developing and delivering products that transform the customer experience. From creating apps like TVGo to new features such as the Talking Guide on the X1 platform, we work every day to make a positive impact through innovation in the pursuit of building amazing products that are enjoyable, easy to use and accessible across all platforms. The team also develops and supports our evolving network architecture, including next-generation consumer systems and technologies, infrastructure and engineering, network integration and management tools, and technical standards. Because our employees are our most valuable asset, we offer a flexible working environment to balance the need to work independently wherever you choose, with days that require collaboration at one of our offices. Our roles primarily reside inside or around one of our Tech...

Sager Electronics, Inc. Sager Electronics, a wholly owned subsidiary of TTI Inc., a Berkshire Hathaway Inc. company, is a North American distributor of Interconnect, Power and Electromechanical components from leading manufacturers worldwide and a provider of custom value-add solutions. Grounded in over 135 years of innovation and service, Sager Electronics provides customers and suppliers a unique combination of operational excellence and innovative business solutions through its Distributing Confidence® business model. Headquartered in Middleborough, MA, Sager operates a national network of field sales representatives and power systems sales engineers, ten strategically located service centers, and a value-add Custom Solutions Center in Lewisville, TX. To learn more about us, visit www.sager.com Sager Culture and Position Description: As a medium-sized company with over 400 employees located across North America, we have a high performing, family-oriented team...

Databuoy Corporation is a technology startup in McLean, VA. We are motivated, social, fun, creative and customer obsessed. Our goal is to build IoT solutions for safety and security. Our award winning gunfire localization and panic button systems are keeping people safe inside and outside. The Embedded Firmware Engineer will bridge between our digital designers and DevOps engineers to develop and deploy working sensor technology. This is a fast paced environment and an opportunity to be part of rapidly growing compamy. Databuoy offers highly competitive pay in the Washington DC Metro Area, with great benefits — medical, dental, vision, retirement benefits, Paid Time Off, Company-wide holidays. Our work environment includes a trendy office space (fussball, ping-pong, massage chairs, and all the bells and whistles), on-site restaurant and gym. We offer free Uber rides to the closest metro station and the Tysons Mall. Responsibilities: Ownership of our...

American Rheinmetall Systems, LLC TITLE Software Engineer/Developer CATEGORY Engineering ABOUT THE ORGANIZATION Rheinmetall's U.S. organizations include American Rheinmetall Systems, American Rheinmetall Vehicles, American Rheinmetall Munitions and American Rheinmetall Defense. The operating companies have established engineering and production capabilities that allow them to modify existing products and develop new solutions that meet the priority requirements of their US customers. These products consist of, but are not limited to, game-changing solutions for next-generation vehicles, innovations for increased soldier lethality, and advanced high-tech munitions. Description Whats your passion? At American Rheinmetall Systems , were driven by technology, and were using it to alter the landscape of todays modern battlespace in order to provide our soldiers with the equipment they need to come home safely. We are committed to supporting critical advancements...