45 assembler tester i jobs found

HM Electronics Location: Carlsbad, CA Internal Req ID: 3751581 Division: Hospitality & Specialty Communications Are you good with your hands? Do assembly instructions make sense to you? Are you looking to start a new career and not just another job? HME is actively recruiting candidates with great Attitudes and Aptitude for an entry-level position as an Assembler Tester I . In this position, you will train for and perform various electromechanical assembly, test, and inspection procedures. This is a great introduction to a rewarding technical career. Not only will you gain technical skills, but you will also have the opportunity to complete additional career development trainings to pursue your career goals. This is a 2nd shift position working 2:30pm - 11:00pm Monday-Friday. Come write your chapter of the HME story. What you will do in the position: Assemble, rework, and reassemble product as specified on applicable documentation Verify...

HM Electronics Location: Carlsbad, CA Internal Req ID: 3751688 Division: Hospitality & Specialty Communications Are you good with your hands? Do assembly instructions make sense to you? Are you looking to start a new career and not just another job? HME is actively recruiting candidates with great Attitudes and Aptitude for an entry-level position as an Assembler Tester I. In this position, you will train for and perform various electromechanical assembly, test, and inspection procedures. This is a great introduction to a rewarding technical career. Not only will you gain technical skills, but you will also have the opportunity to complete additional career development trainings to pursue your career goals. This is a 2nd shift position working 2:30pm - 11:00pm Monday-Friday . Come write your chapter of the HME story. What you will do in the position: Assemble, rework, and reassemble product as specified on applicable documentation Verify...

HM Electronics Location: Carlsbad, CA Internal Req ID: 3751684 Division: Clear-Com Are you good with your hands? Do assembly instructions make sense to you? Are you looking to start a new career and not just another job? Clear Com is actively recruiting candidates with great Attitudes and Aptitude for an entry-level position as an Assembler Tester I. In this position, you will train for and perform various electromechanical assembly, test, and inspection procedures. This is a great introduction to a rewarding technical career. Not only will you gain technical skills, but you will also have the opportunity to complete additional career development trainings to pursue your career goals. This is a 1st shift position working 5:30 am - 2:00 pm Monday-Friday . Come write your chapter of the Clear-Com story. What you will do in the position: Assemble, rework, and reassemble product as specified on applicable documentation Verify accuracy of instruction...

Located in the heart of World Golf Village, Westminster St. Augustine, a Life Care Retirement Community, is currently accepting applications for the position of Dining Services Technician I to work on a part-time basis for 4:00pm to 7:30pm, weekends and during the week. As a part of the Dining Services Dietary Team in our Health Center, this individual will perform a variety of duties including minor food assembly, tray assembly, food delivery and service, dish washing and cleaning as assigned by Supervisors, such as assembly of trays and nourishment preparation and delivery, service of food to residents. As a part of the Westminster Family, this individual will be an important part of the resident’s daily lifestyle experience. EOE, DFWP - "We honor those who have served." We Offer: 403(b) Retirement Plan and Profit Sharing Plan PTO Hours (hours can be sold in 20 hour increments as long as 80 hours remain afterwards) Employee Assistance Program (EAP) - free counseling for...

Certified Surgical Technician Knowledge, Skills & Abilities: Under the supervision of the Operating Room Manager/Administrator and at the direction of Registered Nurses, performs surgical scrubbing and assisting duties within and support of the sterile field during operative procedures. Assures proper care and maintenance of all surgical instrumentation and equipment while maintaining the sterile field. Demonstrates good knowledge of principles and practices of sterile and aseptic technique and infection control. Demonstrates knowledge of all equipment, instruments, procedures and supplies utilized in the operating room within the hospital or hospital out patient department. Projects a professional demeanor and appearance while maintaining the confidentiality of patients, coworkers, and facility information and adhering to the HIPAA policy. Reports, in good faith, any known or suspected activity that appears to violate laws, rules, regulations or the SP Code of Conduct....

Summary: The Warehouse Operator I is responsible for forklift, pallet jack, and/or other material handling equipment as part of the distribution process within a fast paced warehouse setting. The Warehouse Operator will utilize equipment while performing tasks to include shipping, receiving, unloading, scanning, moving, staging, loading, locating, relocating, and stacking product Job Duties: Reads production schedule, customer order, work order, shipping order, or requisition to determine items to be moved, gathered, and/or distributed Pulls and prepares product for shipment, ensuring that the exact number and type of product is loaded Sorts and places materials or items on racks, shelves, or in bins according to predetermined sequence such as size, type, style, color, or product code Assembles customer orders from stock, stage orders and/or conveys orders to packing station or shipping department according to OH or customer pick sheet Loads, unloads, moves, stacks and stages...

Anchor Manufacturing Group is a world class supplier of metal stampings, welded assemblies, fabricated parts and tooling with proven expertise in a variety of industries. Our core expertise includes small to large metal stampings and complex welded assemblies including Class A appearance trim, structural, exterior, interior, exhaust, N.V.H., ride control, seating, steering column, brake, chassis, and safety related components. With 350,000 square feet of manufacturing space and a stand-alone tool and die business, Anchor supplies the highest quality products to North American, European, and Asian OEM's as well as Tier I and Tier II manufacturers since 1970! Anchor Manufacturing is currently in search of experienced supervisors to join our dynamic team. These individuals take great care in developing efficient and productive team members. This person has great communication skills and follows up with action and proven results. Responsibilities With support from...

Anchor Manufacturing Group is a world class supplier of metal stampings, welded assemblies, fabricated parts and tooling with proven expertise in a variety of industries. Our core expertise includes small to large metal stampings and complex welded assemblies including Class A appearance trim, structural, exterior, interior, exhaust, N.V.H., ride control, seating, steering column, brake, chassis, and safety related components. With 350,000 square feet of manufacturing space and a stand-alone tool and die business, Anchor supplies the highest quality products to North American, European, and Asian OEM's as well as Tier I and Tier II manufacturers since 1970! Anchor Manufacturing is currently in search of experienced supervisors to join our dynamic team. These individuals take great care in developing efficient and productive team members. This person has great communication skills and follows up with action and proven results. Responsibilities With support from...

Anchor Manufacturing Group is a world class supplier of metal stampings, welded assemblies, fabricated parts and tooling with proven expertise in a variety of industries. Our core expertise includes small to large metal stampings and complex welded assemblies including Class A appearance trim, structural, exterior, interior, exhaust, N.V.H., ride control, seating, steering column, brake, chassis, and safety related components. With 350,000 square feet of manufacturing space and a stand-alone tool and die business, Anchor supplies the highest quality products to North American, European, and Asian OEM's as well as Tier I and Tier II manufacturers since 1970! Anchor Manufacturing is currently in search of experienced supervisors to join our dynamic team. These individuals take great care in developing efficient and productive team members. This person has great communication skills and follows up with action and proven results. Responsibilities With support from...

Triumph Group Location: Macomb, Michigan, United States, 48042 Function: Other Overview Triumph Geared Solutions - Macomb is a world class manufacturer and supplier of complex gear assemblies, detail gears, and an array of components servicing the aerospace industry. We are deeply passionate about providing quality parts that exceed our customer expectations. We manufacture gearbox assemblies, complete transmissions, detail gears and housings utilizing the latest manufacturing technologies and have fully integrated product testing and assembly capabilities. In the military and commercial marketplace for both fixed wing and rotary aircraft, we ensure a broad range of products and product support with a single point of contact on some of the world's best-known civilian and military aircraft platforms. Job Summary The Cost Estimator at Triumph Geared Solutions Macomb prepares an operational process structure cost estimate to the sales department....

JOB TITLE: Bioinformatician I POSITION NUMBER: 2307-17711-BIOI-01 POSITION LOCATION: Atlanta, GA, USA ANTICIPATED START DATE: Two weeks after candidate identification TRAVEL: As required to fulfill the responsibilities of the position ASRT, Inc. provides scientific, information management, management consulting, bioinformatics, and administrative program support to the Centers for Disease Control and Prevention (CDC) and other Federal and private sector clients. The successful candidate will be a full-time employee of ASRT, Inc., and will be assigned to the Respiratory Diseases Branch (RDB), Division of Bacterial Diseases (DBD), National Center for Immunization and Respiratory Diseases (NCIRD), at the CDC, located at 1600 Clifton Road, Atlanta, GA. SCOPE OF WORK The Bioinformatician I will provide laboratory support services for confirming, characterizing and tracking bacterial infections. MAJOR DUTIES AND RESPONSIBILITIES Provide analysis of data...

Legacy Health Central Sterile Technician I Equal Opportunity Employer/Vet/Disabled US-OR-PORTLAND Job ID: 23-34253 Type: Part Time - Benefitted Good Samaritan Medical Ctr campus Overview At Legacy, our mission is to make life better for our patients, our community and each other. As a Central Sterile Technician, you carry that mission with pride, providing a sterile, clean and safe environment for the best possible medical/surgical care. As you build your legacy with our healthcare community, your attention to detail and concern for the well-being of our patients will have a large impact. Not only will you ensure the proper sterilization of instruments and equipment, you will also help to facilitate change by recommending areas for improvement, expanding your knowledge of the Sterile Technician’s role and sharing your expertise with new staff members. Legacy Good Samaritan Medical Center in Northwest Portland is known for its specialty programs and...

Harvard University EEO Statement We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, gender identity, sexual orientation, pregnancy and pregnancy-related conditions, or any other characteristic protected by law. 20-Sep-2023 Research Assistant I Harvard Medical School 63722BR Position Description Located in Boston, Harvard Medical School is a world-renowned research and training University. This position will assist scientists in performing basic research. For an overview of research in the Rudner Lab please visit: https://rudnerlab.med.harvard.edu/ Responsibilities: The Rudner Lab in the Department of Microbiology at Harvard Medical School is recruiting a research assistant to study how bacteria build their cell envelope with the goal of identifying new targets for antibiotic development. The lab uses...

  Anchor Manufacturing Group is a world class supplier of metal stampings, welded assemblies, fabricated parts and tooling with proven expertise in a variety of industries. Our core expertise includes small to large metal stampings and complex welded assemblies including Class A appearance trim, structural, exterior, interior, exhaust, N.V.H., ride control, seating, steering column, brake, chassis, and safety related components. With 350,000 square feet of manufacturing space and a stand-alone tool and die business, Anchor supplies the highest quality products to North American, European, and Asian OEM's as well as Tier I and Tier II manufacturers since 1970!   Anchor Manufacturing is currently in search of an experienced Human Resources Coordinator to join our dynamic team; this is a part-time position (24-28 hours per week). This individual assist the human resources team with recruitment, onboarding, maintaining records and providing administrative support....

  Anchor Manufacturing Group is a world class supplier of metal stampings, welded assemblies, fabricated parts and tooling with proven expertise in a variety of industries. Our core expertise includes small to large metal stampings and complex welded assemblies including Class A appearance trim, structural, exterior, interior, exhaust, N.V.H., ride control, seating, steering column, brake, chassis, and safety related components. With 350,000 square feet of manufacturing space and a stand-alone tool and die business, Anchor supplies the highest quality products to North American, European, and Asian OEM's as well as Tier I and Tier II manufacturers since 1970!   Anchor Manufacturing is currently in search of an experienced Human Resources Coordinator to join our dynamic team; this is a part-time position (24-28 hours per week). This individual assist the human resources team with recruitment, onboarding, maintaining records and providing administrative support....

  Anchor Manufacturing Group is a world class supplier of metal stampings, welded assemblies, fabricated parts and tooling with proven expertise in a variety of industries. Our core expertise includes small to large metal stampings and complex welded assemblies including Class A appearance trim, structural, exterior, interior, exhaust, N.V.H., ride control, seating, steering column, brake, chassis, and safety related components. With 350,000 square feet of manufacturing space and a stand-alone tool and die business, Anchor supplies the highest quality products to North American, European, and Asian OEM's as well as Tier I and Tier II manufacturers since 1970!   Anchor Manufacturing is currently in search of an experienced Human Resources Coordinator to join our dynamic team; this is a part-time position (24-28 hours per week). This individual assist the human resources team with recruitment, onboarding, maintaining records and providing administrative support....

JBT Corporation AN EQUAL OPPORTUNITY EMPLOYER It is the policy of JBT Corporation to provide equal opportunity for qualified persons and not to discriminate against any applicant for employment because of race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, citizenship, or any other characteristic protected by federal, state or local law at the JBT Corporation location to which this application is submitted. In addition, as a Federal Government contractor, JBT Corporation is an affirmative action employer. If you require accommodation during the application process, please contact the local Human Resources department. EOE-Females/Minorities/Protected Veterans/Individuals with Disabilities If you have a disability or impairment that prevents you from completing the online application, please seek the assistance of your local employment services agency. JBT maintains active relationships with local employment services...

JBT Corporation AN EQUAL OPPORTUNITY EMPLOYER It is the policy of JBT Corporation to provide equal opportunity for qualified persons and not to discriminate against any applicant for employment because of race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, citizenship, or any other characteristic protected by federal, state or local law at the JBT Corporation location to which this application is submitted. In addition, as a Federal Government contractor, JBT Corporation is an affirmative action employer. If you require accommodation during the application process, please contact the local Human Resources department. EOE-Females/Minorities/Protected Veterans/Individuals with Disabilities If you have a disability or impairment that prevents you from completing the online application, please seek the assistance of your local employment services agency. JBT maintains active relationships with local employment services...

Trademasters, an award-winning contractor, with over 30 years of industry experience offering complete facility operations management, maintenance and repairs to millions of square feet of premium government buildings, commercial and residential clients. We provide quality and efficient services for all the following systems or needs: HVAC, plumbing, electrical, call-desk operations, steam, boilers, UPS, generators, custodial, grounds, pest control, fire control systems, elevators, gates, bollards, service calls, architectural, structural and building systems. We have an excellent career opportunity for a full-time Journeyman Licensed Plumber to work at our facilities located in NW Washington, DC. We offer a generous compensation package with benefit coverages beginning on your first day with us at Trademasters! We are V3 (Virginia Values Veterans) employer. Veterans are encouraged to apply. COVID Policy: Prospective and/or new employees will be required to adhere to...

JBT Corporation AN EQUAL OPPORTUNITY EMPLOYER It is the policy of JBT Corporation to provide equal opportunity for qualified persons and not to discriminate against any applicant for employment because of race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, citizenship, or any other characteristic protected by federal, state or local law at the JBT Corporation location to which this application is submitted. In addition, as a Federal Government contractor, JBT Corporation is an affirmative action employer. If you require accommodation during the application process, please contact the local Human Resources department. EOE-Females/Minorities/Protected Veterans/Individuals with Disabilities If you have a disability or impairment that prevents you from completing the online application, please seek the assistance of your local employment services agency. JBT maintains active relationships with local employment services...