5 jobs found in erlanger

Job ID: 2019-2353 # of Openings: 1 Category: Other Company: Southern Air Overview Flight Crews are responsible for the safe and reliable operation of our fleet of Boeing 777's and 737's. Atlas Air Worldwide is a leading global provider of outsourced aircraft and aviation operating services. Southern Air, an AAWW subsidiary is an ACMI carrier that operates a fleet of aircraft for domestic, regional and international applications. All First Officer applicants must possess the following qualifications: Basic Qualifications Hold a current unrestricted or restricted ATP certificate with an airplane category multi-engine class rating and english proficiency endorsement Hold a current FAA First Class Medical Certificate Hold an FCC Restricted Radiotelephone Operator Permit Hold a valid passport with no restrictions on international travel Legally authorized to work in the United States Have a minimum of 1000 hours of total time Military conversion of .3 per sortie Have a minimum of 1000 fixed wing or 500 hours with a 121 carrier Minimum age of 23 (all Southern pilot positions are subject to FAA 121 mandatory retirement regulations) Have the ability to pass a 10 year security background check and a DOT pre-employment test. *Note: ATP issued with a CIRC APCH-VMC Only limitation are acceptable. Preferred Qualifications : Current & Qualified and operating in a part 121, 135 or part 91 environment. Have a minimum of 500 hours of turbine time Please note that all candidates offered a position as a First Officer will be tested in accordance with 14 CFR Part 120.107(5) Sub Part E to determine the presence of the marijuana, cocaine, opiates (including codeine, heroin-6AM, morphine), opioids- hydrocodone, hydromorphone, oxycodone & oxymorphone, phencyclidine (PCP), and amphetamines/methamphetamines (including MDMA, MDA) or metabolites of these drugs. The Company is an Equal Opportunity Employer. It is our policy to afford equal employment opportunity to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, citizenship, place of birth, age, disability, protected veteran status, gender identity or any other characteristic or status protected by applicable in accordance with federal, state and local laws. PM19 PI118123295

Job ID: 2019-2352 # of Openings: 1 Category: Other Company: Southern Air Overview Flight Crews are responsible for the safe and reliable operation of our fleet of Boeing 777's and 737's. Atlas Air Worldwide is a leading global provider of outsourced aircraft and aviation operating services. Southern Air, an AAWW subsidiary is an ACMI carrier that operates a fleet of aircraft for domestic, regional and international applications. All First Officer applicants must possess the following qualifications: Basic Qualifications Hold a current unrestricted ATP certificate with an airplane category multi-engine class rating and english proficiency endorsement Hold a current FAA First Class Medical Certificate Hold an FCC Restricted Radiotelephone Operator Permit Hold a valid passport with no restrictions on international travel Legally authorized to work in the United States Have a minimum of 1500 hours of total time Military conversion of .3 per sortie Have a minimum of 500 hours of turbine time Have a minimum of 1000 fixed wing or 500 hours with a 121 carrier Minimum age of 23 (all Southern pilot positions are subject to FAA 121 mandatory retirement regulations) Do you have the ability to pass a 10 year security background check and a DOT pre-employment test. *Note: ATP issued with a CIRC APCH-VMC Only limitation are acceptable. Preferred Qualifications : Current & Qualified and operating in a part 121, 135 or part 91 environment. Please note that all candidates offered a position as a First Officer will be tested in accordance with 14 CFR Part 120.107(5) Sub Part E to determine the presence of the marijuana, cocaine, opiates (including codeine, heroin-6AM, morphine), opioids- hydrocodone, hydromorphone, oxycodone & oxymorphone, phencyclidine (PCP), and amphetamines/methamphetamines (including MDMA, MDA) or metabolites of these drugs. The Company is an Equal Opportunity Employer. It is our policy to afford equal employment opportunity to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, citizenship, place of birth, age, disability, protected veteran status, gender identity or any other characteristic or status protected by applicable in accordance with federal, state and local laws. PM19 PI118123296

Job ID: 2020-3198 # of Openings: 1 Category: Technical Operations City: Erlanger State: KY Company: Southern Air Overview Mechanics are responsible to operate and maintain company aircraft in accordance with company policy and procedures ultimately ensuring that all FAR and FAA regulatory requirements and mandates are satisfied. Responsibilities Accomplishes scheduled and unscheduled maintenance tasks as assigned during their assigned work shift, ensuring the continued airworthiness of the company aircraft in accordance with FARs and the provisions of this manual, and protect at all times the best interests of the company and its property. Ensures the proper references, manuals, forms or records are available and are being used as specified, and that the proper recording/sign-off of all maintenance tasks are made as detailed within the manual. This includes ensuring that all repairable parts are tagged correctly and with accurate information, including the reason for removal. Accomplishes assigned maintenance tasks within the scope of the standard practice and procedures set forth in this manual, the Manufacturer's Maintenance and/or Overhaul Manuals, and the FARs Complies with all company's rules and regulations regarding industrial safety. Performs incoming aircraft review of recorded discrepancies, malfunctions with the flight crew. Reviews pilot discrepancies to ensure that the entry provides sufficient information on which to base proper corrective action. Provides for the safe movement of aircraft on the ramp and in or around any hangar area. Provides for the fueling, oiling or replenishing of fluids aboard all aircraft in order to ensure compliance with the provisions of this manual. Is thoroughly familiar with the provisions of the company General Maintenance Manual and the Maintenance Manual and with revisions issues by the Quality Control Department. Accomplishes any other duties or responsibilities as assigned by the Supervisor of Maintenance. Quality Control Functions The Mechanic, when qualified and authorized as an RII Designated Inspector, is the direct representative of the Director of Quality Assurance, Quality Control. When functioning as a designated inspector, the Mechanic shall adheres to the detailed duties and responsibilities of the Quality Control Department as detailed in "Quality Control/Inspection on page 4-01-1. In addition to those duties above, the Mechanic shall notify Maintenance Control of any action required or taken, which necessitates a RII inspection. This notification shall be via telephone or facsimile. For those mechanics that are not assigned to JFK, they will report to the respective manager/supervisor of line stations. Qualifications Aircraft Mechanics must possess a valid FAA Mechanic Certification in accordance with the requirements of F.A.R. 65, Subpart D, and have technical experience on Boeing 747 or similar aircraft. Must possess FAA Airframe and Powerplant Licenses OR FCC License (avionics) At least 12 months of effective performance as a Mechanics Helper At least 18 months of heavy jet (preferably 747) experience The Company is an Equal Opportunity Employer. It is our policy to afford equal employment opportunity to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, citizenship, place of birth, age, disability, protected veteran status, gender identity or any other characteristic or status protected by applicable in accordance with federal, state and local laws. If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law document at http://www1.eeoc.gov/employers/poster.cfm . To view our Pay Transparency Statement, please click here: Pay Transparency Statement PI118120869

Job ID: 2020-3197 # of Openings: 1 Category: Technical Operations City: Erlanger State: KY Company: Southern Air Overview Mechanics are responsible to operate and maintain company aircraft in accordance with company policy and procedures ultimately ensuring that all FAR and FAA regulatory requirements and mandates are satisfied. Responsibilities Accomplishes scheduled and unscheduled maintenance tasks as assigned during their assigned work shift, ensuring the continued airworthiness of the company aircraft in accordance with FARs and the provisions of this manual, and protect at all times the best interests of the company and its property. Ensures the proper references, manuals, forms or records are available and are being used as specified, and that the proper recording/sign-off of all maintenance tasks are made as detailed within the manual. This includes ensuring that all repairable parts are tagged correctly and with accurate information, including the reason for removal. Accomplishes assigned maintenance tasks within the scope of the standard practice and procedures set forth in this manual, the Manufacturer's Maintenance and/or Overhaul Manuals, and the FARs Complies with all company's rules and regulations regarding industrial safety. Performs incoming aircraft review of recorded discrepancies, malfunctions with the flight crew. Reviews pilot discrepancies to ensure that the entry provides sufficient information on which to base proper corrective action. Provides for the safe movement of aircraft on the ramp and in or around any hangar area. Provides for the fueling, oiling or replenishing of fluids aboard all aircraft in order to ensure compliance with the provisions of this manual. Is thoroughly familiar with the provisions of the company General Maintenance Manual and the Maintenance Manual and with revisions issues by the Quality Control Department. Accomplishes any other duties or responsibilities as assigned by the Supervisor of Maintenance. Quality Control Functions The Mechanic, when qualified and authorized as an RII Designated Inspector, is the direct representative of the Director of Quality Assurance, Quality Control. When functioning as a designated inspector, the Mechanic shall adheres to the detailed duties and responsibilities of the Quality Control Department as detailed in "Quality Control/Inspection on page 4-01-1. In addition to those duties above, the Mechanic shall notify Maintenance Control of any action required or taken, which necessitates a RII inspection. This notification shall be via telephone or facsimile. For those mechanics that are not assigned to JFK, they will report to the respective manager/supervisor of line stations. Qualifications Aircraft Mechanics must possess a valid FAA Mechanic Certification in accordance with the requirements of F.A.R. 65, Subpart D, and have technical experience on Boeing 747 or similar aircraft. Must possess FAA Airframe and Powerplant Licenses OR FCC License (avionics) At least 12 months of effective performance as a Mechanics Helper At least 18 months of heavy jet (preferably 747) experience The Company is an Equal Opportunity Employer. It is our policy to afford equal employment opportunity to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, citizenship, place of birth, age, disability, protected veteran status, gender identity or any other characteristic or status protected by applicable in accordance with federal, state and local laws. If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law document at http://www1.eeoc.gov/employers/poster.cfm . To view our Pay Transparency Statement, please click here: Pay Transparency Statement PI118120871

Job ID: 2020-3231 # of Openings: 1 Category: Technical Operations City: Erlanger State: KY Company: Atlas Air, Inc Overview Leads the warehouse and inventory management of materials and parts for the Atlas Air Material Operations Department at the warehouse and flight line. Develops/implements processes and procedures for efficient material handling. Oversees, monitors and reviews activities of Material Operations team during unattended supervisory shifts. Responsibilities Leads and monitors the warehouse team and participates in daily stores functions such as shipping, receiving, binning, issuing, housekeeping and security of technical spares. Oversees monitors and reviews activity of Material Operations Specialist and Clerks during their shift. Responsible for updating and informing Supervisors and Managers of staff schedule needs and changes Performs Level 1 and level 2 receiving inspection functions on behalf of Quality Control to insure that parts acquired contain the proper documentation, conform to acceptable quality standards and comply with Atlas Air policies and FARs. Assists Repair Department with unserviceable parts review and disposition. Makes recommendations on scrap/repair decisions and ensures condemned parts are handled in accordance with company policy. Reviews and resolves inventory discrepancies/inquiries in a timely manner. Enforces and develops processes and procedures to ensure efficient material handling are in compliance with company policies, procedures and regulatory requirements. Communicate with Maintenance and HDQ Materials to identify and correct potential disruptions related to parts or tooling for AOG, DMI, MELs and scheduled maintenance. Maintains proper supplies and equipment for the safe packaging and transport of aircraft parts. Assists the Supervisors and Manager in the training of new hires, including the identification and handling of dangerous goods. Responsible for ensuring shelf life procedures are completed and monitored and no materials are used in aircraft maintenance beyond their shelf life limits. Responsible for tooling and equipment storage, handling, control, logistics and shipping them out for repairs and calibration. Ensures that safe clean and organized workplace conditions are maintained. Reports any safety incidents, accidents or violations that may occur Frequent: lifting, carrying, pushing or pulling of moderately heavy weight objects (up to 70 pounds); controlling or driving materials handling equipment in a congested warehouse environment. Subject to call back, standby, and working flexible hours, weekends, holidays and extended hours. Ability to travel as required supporting operational needs. Qualifications Bachelor's degree or equivalent work experience preferred PI118120878